· Radio is a Kenwood TS-2000
· Power out is 60 watts
· Antenna is a full wavelength loop for the 80 meter band at 25 feet above ground and fed with 300-Ohm ladder line using a 4:1 current balun and 25 feet of LMR 400 coaxial cable
· Signalink digital interface
· Radio is a Marantz C5900 Tri-Band 6M / 2M / 70 cm
· Power out is 8 watts
· Antenna is a Larsen 5/8 wavelength ground plane at 20 feet above ground
· Signalink digital interface
· Radio is the sub-band on the Kenwood TS-2000
· Power out is 5 watts
· Antenna is a horizontal Cushcraft 10-element Yagi
· Internal Tasco 1200 Baud AX.25 TNC in KISS mode
· Windows 10 operating system
· BPQ32 Version 6.0.24.42 by G8BPQ
· HF 300 Baud AFSK AX.25 packet modem is UZ7HO SoundModem
· HF 300 Baud AFSK IL2P packet modem is UZ7HO SoundModem
· QPSK V26A 600 Baud IL2P protocol with added CRC bits by G8BPQ QtSoundModem
· VARA HF modem by EA5HVK
· VARA FM modem EA5HVK
· WinRPR AX.25 proprietary software modem with permission from SCS Corporation and kindly provided in coordination with the The Virginia Packet Network
· ARDOPC modem by G8BPQ
· VHF1200 Baud AX.25 packet modem is UZ7HO SoundModem
· ISP is TMobile Home Internet
· Reverse-proxy http, udp, and tcp tunnels provided by LocalXpose
BMHNOD:W7BMH-7} Ports
1 PKT.300B AX.25 14,103.3 kHz
2 ROBUST PACKET 14,103.8 kHz
3 ARDOP.500 14,103.8 kHz
4 VARA.500 14,103.8 kHz
5 PKT.300B IL2P 14,104.3 kHz
6 QPSK V26A.600B IL2PC 14,103.8
7 PKT.1200B-AX25 144.970 MHz
8 PKT.1200B-AX25 145.030 MHz
9 VARA.FM 144.970 MHz
10 TELNET
11 AX/IP/UDP
12 Loopback
Example BPQ32 Configuration File
Example WinRPR Configuration File For KISS Mode
Example WinRPR Configuration File For WA8DED HOSTMODE
Example BPQ32 Port Configuration For WinRPR in WA8DED HOSTMODE
Example UZ7HO SoundModem Configuration File
Example QtSoundModem Configuration File
QtSoundModem GUI Configuration for QPSK V26A Modem
QtSoundModem GUI TCP Setup to enable the HOST modem on port 7989
QtSoundModem GUI modem configuration for IL2P protocol with added CRC bits
GUI for devices settings:
Modems settings with FX.25 mode on incoming packets only, the preferred mode for most packet operation